Measuring indicators PUE C_31H
| Click to enlarge |
|
| Functions of measuring indicator series PUE C/31H: - measuring units: [g], [kg], [N], [ct], [lb]; - tarring in whole measuring range; - automatic tare, tare memory; - counting pieces with same detail mass; - +/- mass control of set reference mass; - per cent deviation from set reference mass; - averaging of weighing result, digital filter; - control of power supply from batteries; - timer switch off of the scale; - adjusting backlit when operating on batteries; - adjustable speed of transmission between 1200-38400bit/s; - continuous transmission of data through RS 232; - manual or automatic mode for RS 232; - weighing loads with autozero being switched off; - measurement of maximal force on the weighing pan or maximal mass placed on weighing pan; - measurement of force influencing the weighing pan (in Newtons); - control of starting mass; - possibility of connecting additional LCD display; - summing function of measurements. Possibility of designing printouts according to individual needs.
|
|||||||
|
|||||||
| Technical data: | PUE C/31H | PUE C/31H/Z |
| Display | LCD | |
| Keyboard | microswitch | |
| Quantity of buttons | 5 | |
| Maximal quantity of verifying units | 6000 e | |
| Maximal quantity of countings from A/C converter | 838 860 × 10 | |
| Maximal increase of signal | 19,2 mV | |
| Maximal voltage on one verifying unit | 3,2µV | |
| Minimal voltage on one verifying unit | 1,0µV | |
| Working temperature | -10° - +40 °C | |
| Minimal impedance of load cell | 80 |
|
| Maximal impedance of load cell | 1200 |
|
| Connection of load cells | 4 or 6 cables + shield | |
| Multi range | 1 or 2 ranges | |
| Voltage on load cell | 5V DC | |
| Interface | RS 232 | |
| Aditional display | LCD (option) | |
| Casing | stainless steel | |
| IP rating | IP 66/67 | |
| Standard power supply | 110-120VAC 60Hz and 220-240VAC 50Hz and SLA 6V/3,4Ah |
power adapter 230V AC/11VAC and SLA 6V/3,4Ah |
| Optional power supply | - | 10-12V AC/1,1A Imax=600mA |
| Means of power supply | power supply cable built in SLA battery | detachable adapter for charging battery built in SLA battery |
| Average active time on accumulators | 45 h | |
| Additional equipment: | |
| "Kafka" thermal printer | KR-01/KR-04 converter |
| "Epson" needle printer | Cable RS 232 [scale - computer] - P0253 |
| Large LCD display 4,5'' | Cable RS 232 [scale - thermal printer] - P0261 |
| Stand for measuring indicator | Cable RS 232 [scale - "Epson" printer] - P0259 |
| Power loop output AP2 | Cable for plugging to car lighter 12V - K0042 |
| LCD display in stainless steel casing (accessible with balance as complete set only) |
|
Write Review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:

Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
There are no additional images for this product.

